Writing Device Drivers
Previous Next

Document Information

Preface

Part I Designing Device Drivers for the Solaris Platform

1.  Overview of Solaris Device Drivers

2.  Solaris Kernel and Device Tree

3.  Multithreading

4.  Properties

5.  Managing Events and Queueing Tasks

6.  Driver Autoconfiguration

7.  Device Access: Programmed I/O

8.  Interrupt Handlers

9.  Direct Memory Access (DMA)

10.  Mapping Device and Kernel Memory

11.  Device Context Management

12.  Power Management

13.  Hardening Solaris Drivers

14.  Layered Driver Interface (LDI)

Part II Designing Specific Kinds of Device Drivers

15.  Drivers for Character Devices

16.  Drivers for Block Devices

17.  SCSI Target Drivers

18.  SCSI Host Bus Adapter Drivers

19.  Drivers for Network Devices

20.  USB Drivers

Part III Building a Device Driver

21.  Compiling, Loading, Packaging, and Testing Drivers

22.  Debugging, Testing, and Tuning Device Drivers

23.  Recommended Coding Practices

Part IV Appendixes

A.  Hardware Overview

B.  Summary of Solaris DDI/DKI Services

C.  Making a Device Driver 64-Bit Ready

D.  Console Frame Buffer Drivers

Solaris Consoles and the Kernel Terminal Emulator

Console Visual I/O Interfaces

Implementing the Visual I/O Interfaces in Console Frame Buffer Drivers

Implementing Polled I/O in Console Frame Buffer Drivers

Frame Buffer Specific Configuration Module

The X Window System Frame Buffer Specific DDX Module

Developing, Testing, and Debugging Console Frame Buffer Drivers

Index
Appendix D

Console Frame Buffer Drivers

Drivers for frame buffers that are used for the system console must provide interfaces to enable the system to display text on the console. The Solaris OS provides enhanced visual I/O interfaces to enable the kernel terminal emulator to display text directly on the console frame buffer. This appendix describes how to add the necessary interfaces to a frame buffer driver to enable the driver to interact with the Solaris kernel terminal emulator.
Previous Next