OpenSolaris Distribution Constructor Guide
|
|||
|
1. Introduction to the Distribution Constructor 2. Setup for the Distribution Constructor |
Slim CD Manifest File<!--
CDDL HEADER START
The contents of this file are subject to the terms of the
Common Development and Distribution License (the "License").
You may not use this file except in compliance with the License.
You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
or http://www.opensolaris.org/os/licensing.
See the License for the specific language governing permissions
and limitations under the License.
When distributing Covered Code, include this CDDL HEADER in each
file and include the License file at usr/src/OPENSOLARIS.LICENSE.
If applicable, add the following below this CDDL HEADER, with the
fields enclosed by brackets "[]" replaced with your own identifying
information: Portions Copyright [yyyy] [name of copyright owner]
CDDL HEADER END
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
XML specification for building the all languages OpenSolaris
live CD iso and usb image
-->
<distribution name="OpenSolaris">
<distro_constr_params>
<distro_constr_flags>
<!--
Controls whether the DC should stop
if there is an error when the DC is running
-->
<stop_on_error>true</stop_on_error>
<!--
You can specify the step to resume the
build from here with the resume_from
attribute field of checkpoint_enable.
This value will be overridden by
the command line if the -r flag is used.
Valid values are step
numbers or name
-->
<checkpoint_enable>
<!--
true implies Checkpointing is enabled
-->
true
</checkpoint_enable>
</distro_constr_flags>
<!--
The preferred authority to install packages into the
pkg_image area from.
The default url is: http://pkg.opensolaris.org/release
The default authname is opensolaris.org
-->
<pkg_repo_default_authority>
<main
url="http://pkg.opensolaris.org/release"
authname="opensolaris.org"/>
<!--
If you want to use one or more mirrors that are
setup for the authority, specify the urls here.
-->
<!--
Uncomment before using
<mirror url="" />
-->
</pkg_repo_default_authority>
<!--
Any additional non-preferred authorities to pull packages
from should be specified here. Multiple additional
authorities may be specified.
If you want to use one or more mirrors that are
setup for the authority, specify the urls here.
-->
<!--
Uncomment before using.
<pkg_repo_addl_authority>
<main
url=""
authname=""/>
<mirror url="" />
</pkg_repo_addl_authority>
-->
<!--
The default preferred authority to be used by the system
after it has been installed.
The default url is: http://pkg.opensolaris.org/release
The default authname is opensolaris.org
If you want to use one or more mirrors that are
setup for the authority, specify the urls here.
-->
<post_install_repo_default_authority>
<main
url="http://pkg.opensolaris.org/release"
authname="opensolaris.org"/>
<!--
Uncomment before using.
<mirror url="" />
-->
</post_install_repo_default_authority>
<!--
Any additional non-preferred authorities to use after the
system has been installed. Multiple additional authorities
may be specified.
If you want to use one or more mirrors that are
setup for the authority, specify the urls here.
-->
<!--
Uncomment before using.
<post_install_repo_addl_authority>
<main
url=""
authname=""/>
<mirror url="" />
</post_install_repo_addl_authority>
-->
</distro_constr_params>
<img_params>
<!--
Where to build. This can be a zfs dataset or a mountpoint.
The area will be created if it doesn't exist. If the build_area
is not a zfs dataset or mountpoint, checkpointing will not
be enabled.
-->
<build_area>rpool/dc</build_area>
<!--
list of packages used to form the installed image
-->
<packages>
<!--
Due to dependency issues, SUNWcsd and SUNWcs
must be listed first in the package list,
and SUNWcsd must precede SUNWcs
-->
<!--
By default the latest build available, in the
specified IPS repository, is installed.
If another build is required, the build number has
to be appended to the 'entire' package in following
form:
<pkg_name="[email protected]#/>
-->
<pkg name="entire"/>
<pkg name="SUNWcsd"/>
<pkg name="SUNWcs"/>
<pkg name="babel_install"/>
<pkg name="SUNWslim-utils"/>
</packages>
<!--
Items below this line are rarely configured
-->
<!--
Packages to be removed from the pkg_image area before
bootroot construction
-->
<post_install_remove_packages>
<!--
babel_install must be listed before slim_install
because babel_install depends on slim_install,
so, slim_install can't be uninstall first
-->
<pkg name="babel_install"/>
<pkg name="slim_install"/>
</post_install_remove_packages>
<!--
If/how to compress the live image.
type = compression algorithm to use for pkg.zlib and misc.zlib.
Valid types are lzma, gzip, and none.
-->
<live_img_compression type="lzma"/>
<!--
Grub menu modifications. Will use menu.lst if not specified
-->
<grub_menu_modifications>
<!--
Specify a title for the grub menu.
If a title for the grub menu is not specified,
the first line of /etc/release will be used as
the title for the grub menu
-->
<!--
Uncomment before using
<title>Special Grub Title Text</title>
-->
<entry>
<title_suffix>with magnifier</title_suffix>
<line>kernel$ /platform/i86pc/kernel/$ISADIR/unix \
-B assistive_tech=magnifier</line>
<line>module /boot/$ISADIR/x86.microroot</line>
</entry>
<entry>
<title_suffix>with screen reader</title_suffix>
<line>kernel$ /platform/i86pc/kernel/$ISADIR/unix \
-B assistive_tech=reader</line>
<line>module /boot/$ISADIR/x86.microroot</line>
</entry>
<entry>
<title_suffix>Enable SSH</title_suffix>
<line>kernel$ /platform/i86pc/kernel/$ISADIR/unix -B livessh=enable</line>
<line>module /boot/$ISADIR/x86.microroot</line>
</entry>
</grub_menu_modifications>
<!--
Indicate whether the IPS index should be generated for
pkg install and uninstall. The default is to not
generate the IPS search index
-->
<generate_ips_search_index>
false
</generate_ips_search_index>
<!--
Files and dirs to be included in the bootroot of all media
delivered by this distribution. Bootroot contains the
minimal list of contents in order to be able to
boot and setup a running system. These files and dirs
must exist in the pkg_image area.
-->
<bootroot_contents>
<base_include type="file">usr/sbin/pmadm</base_include>
<base_include type="file">usr/sbin/lofiadm</base_include>
<base_include type="file">usr/sbin/devfsadm</base_include>
<base_include type="file">usr/sbin/modload</base_include>
<base_include type="file">usr/sbin/i86/modload</base_include>
<base_include type="file">usr/sbin/mount</base_include>
<base_include type="file">usr/sbin/hostconfig</base_include>
<base_include type="file">usr/sbin/chroot</base_include>
<base_include type="file">usr/sbin/syslogd</base_include>
<base_include type="file">usr/bin/coreadm</base_include>
<base_include type="file">usr/bin/bash</base_include>
<base_include type="file">usr/bin/ksh</base_include>
<base_include type="file">usr/bin/cat</base_include>
<base_include type="file">usr/bin/echo</base_include>
<base_include type="file">usr/bin/false</base_include>
<base_include type="file">usr/bin/grep</base_include>
<base_include type="file">usr/bin/ls</base_include>
<base_include type="file">usr/bin/rm</base_include>
<base_include type="file">usr/bin/svcprop</base_include>
<base_include type="file">usr/bin/true</base_include>
<base_include type="file">usr/bin/cd</base_include>
<base_include type="file">usr/bin/test</base_include>
<base_include type="file">usr/bin/sleep</base_include>
<base_include type="file">usr/bin/expr</base_include>
<base_include type="file">usr/lib/fs/hsfs/fstyp</base_include>
<base_include type="file">usr/lib/fs/hsfs/fstyp.so.1</base_include>
<base_include type="file">usr/lib/fs/hsfs/mount</base_include>
<base_include type="file">usr/lib/fs/ufs/fstyp</base_include>
<base_include type="file">usr/lib/fs/ufs/fstyp.so.1</base_include>
<base_include type="file">usr/lib/fs/ufs/mount</base_include>
<base_include type="file">usr/lib/libfstyp.so.1</base_include>
<base_include type="file">usr/lib/platexec</base_include>
<base_include type="file">usr/lib/devfsadm/devfsadmd</base_include>
<base_include type="file">usr/lib/libm.so.2</base_include>
<base_include type="file">usr/lib/libm.so</base_include>
<base_include type="file">usr/lib/libfstyp.so</base_include>
<base_include type="file">usr/lib/libz.so</base_include>
<base_include type="file">usr/lib/libz.so.1</base_include>
<base_include type="file">usr/bin/i86/ksh93</base_include>
<base_include type="file">usr/lib/isaexec</base_include>
<base_include type="file">usr/lib/libast.so.1</base_include>
<base_include type="file">usr/lib/libcmd.so.1</base_include>
<base_include type="file">usr/lib/libdll.so.1</base_include>
<base_include type="file">usr/lib/libshell.so.1</base_include>
<base_include type="file">usr/share/lib/xml/dtd/service_bundle.dtd.1</base_include>
<base_include type="file">var/sadm/install/admin/default</base_include>
<base_include type="file">var/sadm/system/admin/default_java</base_include>
<base_include type="file">var/sadm/install/contents</base_include>
<base_include type="file">var/adm/utmpx</base_include>
<base_include type="file">var/adm/wtmpx</base_include>
<base_include type="file">var/adm/aculog</base_include>
<base_include type="file">var/lib/postrun/postrun-runq</base_include>
<base_include type="file">var/lib/postrun/postrun</base_include>
<base_include type="file">var/log/postrun.log</base_include>
<base_include type="file">var/log/authlog</base_include>
<base_include type="file">var/log/syslog</base_include>
<base_include type="file">var/saf/zsmon/log</base_include>
<base_include type="file">var/spool/cron/crontabs/adm</base_include>
<base_include type="file">var/spool/cron/crontabs/root</base_include>
<base_include type="file">var/nis/NIS+LDAPmapping.template</base_include>
<base_include type="file">var/yp/aliases</base_include>
<base_include type="file">var/yp/nicknames</base_include>
<base_include type="dir">kernel</base_include>
<base_include type="dir">boot</base_include>
<base_include type="dir">platform</base_include>
<base_include type="dir">system</base_include>
<base_include type="dir">lib</base_include>
<base_include type="dir">sbin</base_include>
<base_include type="dir">dev</base_include>
<base_include type="dir">devices</base_include>
<base_include type="dir">usr/lib/devfsadm/linkmod</base_include>
<base_include type="dir">root</base_include>
<base_include type="dir">jack</base_include>
<base_include type="dir">var/svc/manifest</base_include>
<base_include type="dir">var/svc/profile</base_include>
<base_include type="dir">var/pkg/catalog</base_include>
<base_include type="file">var/pkg/cfg_cache</base_include>
<base_include type="dir">etc</base_include>
<base_exclude type="dir">etc/gconf</base_exclude>
<base_exclude type="dir">etc/brltty</base_exclude>
<base_exclude type="dir">etc/gtk-2.0</base_exclude>
<base_exclude type="dir">etc/notices</base_exclude>
</bootroot_contents>
<output_image>
<!--
List of finalizer scripts to be run. They are used
to customize the image and will be run in the
order listed. The name of the checkpoint to
be created when this script is run is required.
The checkpoint message is displayed when the
step is run and is optional.
There are 5 standard arguments that are passed to
every finalizer script (manifest socket, pkg_image path,
tmp dir, bootroot build area, media dir). You may also
specify additional arguments (arg6+) in the argslist.
This argslist is a whitespace-separated list of double
quoted strings.
-->
<finalizer>
<script name="/usr/share/distro_const/pre_bootroot_pkg_image_mod">
<checkpoint
name="im-mod"
message="Image area modifications"/>
</script>
<script name="/usr/share/distro_const/slim_cd/
slimcd_pre_bootroot_pkg_image_mod">
<checkpoint
name="slim-im-mod"
message="Slim CD Image area Modifications"/>
</script>
<script name="/usr/share/distro_const/bootroot_initialize.py">
<checkpoint
name="br-init"
message="Boot root initialization"/>
</script>
<script name="/usr/share/distro_const/slim_cd/slimcd_bootroot_configure">
<checkpoint
name="slim-br-config"
message="Slim CD boot root configuration"/>
</script>
<script name="/usr/share/distro_const/bootroot_configure">
<checkpoint
name="br-config"
message="Boot root configuration"/>
<argslist>
"/usr/share/distro_const/slim_cd/slimcd_generic_live.xml"
".livecd"
</argslist>
</script>
<script name="/usr/share/distro_const/bootroot_archive.py">
<checkpoint
name="br-arch"
message="Boot root archiving (64-bit)"/>
<argslist>"amd64"</argslist>
</script>
<script name="/usr/share/distro_const/bootroot_archive_32">
<checkpoint
name="br-arch-32"
message="Boot root archiving (32-bit)"/>
<argslist>"x86"</argslist>
</script>
<script name="/usr/share/distro_const/slim_cd/
slimcd_post_bootroot_pkg_image_mod">
<checkpoint
name="slim-post-mod"
message="Slim CD post bootroot image area modification"/>
</script>
<script name="/usr/share/distro_const/grub_setup.py">
<checkpoint
name="grub-setup"
message="Grub menu setup"/>
</script>
<script name="/usr/share/distro_const/post_bootroot_pkg_image_mod">
<checkpoint
name="post-mod"
message="Post bootroot image area modification"/>
<argslist>
"usr_zlib_compression=lzma"
</argslist>
</script>
<script name="/usr/share/distro_const/slim_cd/slimcd_gen_cd_content">
<checkpoint
name="gen-slim-cont"
message="Generate Slim CD image content list"/>
</script>
<script name="/usr/share/distro_const/create_iso">
<checkpoint
name="iso"
message="ISO image creation"/>
</script>
<script name="/usr/share/distro_const/create_usb">
<checkpoint
name="usb"
message="USB image creation"/>
</script>
</finalizer>
<bootroot>
<!--
If/how to compress the bootroot. Valid
types are gzip and none
-->
<compression type="gzip" level="9"/>
</bootroot>
</output_image>
</img_params>
<key_value_pairs>
<pair key="iso_sort"
value="/usr/share/distro_const/slim_cd/slimcd_iso.sort"/>
</key_value_pairs>
</distribution>
|
||
|