Solaris Express Installation Guide: Network-Based Installations
Previous Next

Document Information

Preface

Part I Planning to Install Over the Network

1.  Where to Find Solaris Installation Planning Information

2.  Preconfiguring System Configuration Information (Tasks)

3.  Preconfiguring With a Naming Service or DHCP

Part II Installing Over a Local Area Network

4.  Installing From the Network (Overview)

5.  Installing From the Network With DVD Media (Tasks)

6.  Installing From the Network With CD Media (Tasks)

7.  Installing Over the Network (Examples)

8.  Installing From the Network (Command Reference)

Part III Installing Over a Wide Area Network

9.  WAN Boot (Overview)

10.  Preparing to Install With WAN Boot (Planning)

11.  Installing With WAN Boot (Tasks)

12.  SPARC: Installing With WAN Boot (Tasks)

13.  SPARC: Installing With WAN Boot (Examples)

Sample Site Setup

Create the Document Root Directory

Create the WAN Boot Miniroot

Install the wanboot Program on the WAN Boot Server

Create the /etc/netboot Hierarchy

Copy the wanboot-cgi Program to the WAN Boot Server

(Optional) Configure the WAN Boot Server as a Logging Server

Configure the WAN Boot Server to Use HTTPS

Provide the Trusted Certificate to the Client

(Optional) Use Private Key and Certificate for Client Authentication

Create the Keys for the Server and the Client

Create the Solaris Flash Archive

Create the sysidcfg File

Create the Client's Profile

Create and Validate the rules File

Create the System Configuration File

Create the wanboot.conf File

Check the net Device Alias in OBP

Install Keys on the Client

Install the Client

14.  WAN Boot (Reference)

Part IV Appendixes

A.  Troubleshooting (Tasks)

B.  Installing or Upgrading Remotely (Tasks)

Glossary

Index

Check the net Device Alias in OBP

To boot the client from the WAN with the boot net, the net device alias must be set to the client's primary network device. At the client ok prompt, type the devalias command to verify that the net alias is set to the primary network device /pci@1f,0/pci@1,1/network@c,1.

ok devalias
screen                   /pci@1f,0/pci@1,1/SUNW,m64B@2
net                      /pci@1f,0/pci@1,1/network@c,1
net2                     /pci@1f,0/pci@1,1/network@5,1
disk                     /pci@1f,0/pci@1/scsi@8/disk@0,0
cdrom                    /pci@1f,0/pci@1,1/ide@d/cdrom@0,0:f
keyboard                 /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
mouse                    /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8

In the previous output example, the primary network device /pci@1f,0/pci@1,1/network@c,1 is assigned to the net alias. You do not need to reset the alias.
Previous Next