Document Information
Preface
Part I TCP/IP Administration
1. Solaris TCPIP Protocol Suite (Overview)
2. Planning an IPv4 Addressing Scheme (Tasks
3. Planning an IPv6 Addressing Scheme (Overview)
4. Planning an IPv6 Network (Tasks)
5. Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)
6. Administering Network Interfaces (Tasks)
7. Enabling IPv6 on a Network (Tasks)
8. Administering a TCP/IP Network (Tasks)
9. Troubleshooting Network Problems (Tasks)
10. TCP/IP and IPv4 in Depth (Reference)
11. IPv6 in Depth (Reference)
Part II DHCP
12. About Solaris DHCP (Overview)
13. Planning for DHCP Service (Tasks)
14. Configuring the DHCP Service (Tasks)
15. Administering DHCP (Tasks)
16. Configuring and Administering DHCP Clients
17. Troubleshooting DHCP (Reference)
18. DHCP Commands and Files (Reference)
Part III IP Security
19. IP Security Architecture (Overview)
20. Configuring IPsec (Tasks)
21. IP Security Architecture (Reference)
22. Internet Key Exchange (Overview)
23. Configuring IKE (Tasks)
24. Internet Key Exchange (Reference)
25. Solaris IP Filter (Overview)
26. Solaris IP Filter (Tasks)
Part IV Mobile IP
27. Mobile IP (Overview)
28. Administering Mobile IP (Tasks)
Creating the Mobile IP Configuration File (Task Map)
Creating the Mobile IP Configuration File
How to Plan for Mobile IP
How to Create the Mobile IP Configuration File
How to Configure the General Section
How to Configure the Advertisements Section
How to Configure the GlobalSecurityParameters Section
How to Configure the Pool Section
How to Configure the SPI Section
How to Configure the Address Section
Modifying the Mobile IP Configuration File
How to Modify the General Section
How to Modify the Advertisements Section
How to Modify the GlobalSecurityParameters Section
How to Modify the Pool Section
How to Modify the SPI Section
How to Modify the Address Section
How to Add or Delete Configuration File Parameters
How to Display Current Parameter Values in the Configuration File
Displaying Mobility Agent Status
How to Display Mobility Agent Status
Displaying Mobility Routes on a Foreign Agent
How to Display Mobility Routes on a Foreign Agent
29. Mobile IP Files and Commands (Reference)
Part V IPMP
30. Introducing IPMP (Overview)
31. Administering IPMP (Tasks)
Part VI IP Quality of Service (IPQoS)
32. Introducing IPQoS (Overview)
33. Planning for an IPQoS-Enabled Network (Tasks)
34. Creating the IPQoS Configuration File (Tasks)
35. Starting and Maintaining IPQoS (Tasks)
36. Using Flow Accounting and Statistics Gathering (Tasks)
37. IPQoS in Detail (Reference)
Glossary
Index
|
Modifying the Mobile IP Configuration File (Task Map)
Task |
Description |
For Instructions |
Modify the General section. |
Uses the mipagentconfig change command to change the value
of a label in the General section of the Mobile IP configuration file. |
How to Modify the General Section |
Modify
the Advertisements section. |
Uses the mipagentconfig change command to change the value of a
label in the Advertisements section of the Mobile IP configuration file. |
How to Modify the Advertisements Section |
Modify the GlobalSecurityParameters
section. |
Uses the mipagentconfig change command to change the value of a label in
the GlobalSecurityParameters section of the Mobile IP configuration file. |
How to Modify the GlobalSecurityParameters Section |
Modify the Pool section. |
Uses the
mipagentconfig change command to change the value of a label in the Pool
section of the Mobile IP configuration file. |
How to Modify the Pool Section |
Modify the SPI section. |
Uses the mipagentconfig change
command to change the value of a label in the SPI section of
the Mobile IP configuration file. |
How to Modify the SPI Section |
Modify the Address section. |
Uses the mipagentconfig change command to change
the value of a label in the Address section of the Mobile IP
configuration file. |
How to Modify the Address Section |
Add or delete parameters. |
Uses the mipagentconfig add or delete commands to
add new parameters, labels, and values or to delete existing ones in any
section of the Mobile IP configuration file. |
How to Add or Delete Configuration File Parameters |
Display the current settings of parameter
destinations. |
Uses the mipagentconfig get command to display current settings of any section of
the Mobile IP configuration file. |
How to Display Current Parameter Values in the Configuration File |
|