Document Information
Preface
Part I TCP/IP Administration
1. Solaris TCPIP Protocol Suite (Overview)
2. Planning an IPv4 Addressing Scheme (Tasks
3. Planning an IPv6 Addressing Scheme (Overview)
4. Planning an IPv6 Network (Tasks)
5. Configuring TCP/IP Network Services and IPv4 Addressing (Tasks)
6. Administering Network Interfaces (Tasks)
7. Enabling IPv6 on a Network (Tasks)
8. Administering a TCP/IP Network (Tasks)
9. Troubleshooting Network Problems (Tasks)
10. TCP/IP and IPv4 in Depth (Reference)
11. IPv6 in Depth (Reference)
Part II DHCP
12. About Solaris DHCP (Overview)
13. Planning for DHCP Service (Tasks)
14. Configuring the DHCP Service (Tasks)
15. Administering DHCP (Tasks)
16. Configuring and Administering DHCP Clients
17. Troubleshooting DHCP (Reference)
18. DHCP Commands and Files (Reference)
Part III IP Security
19. IP Security Architecture (Overview)
20. Configuring IPsec (Tasks)
21. IP Security Architecture (Reference)
22. Internet Key Exchange (Overview)
23. Configuring IKE (Tasks)
24. Internet Key Exchange (Reference)
25. Solaris IP Filter (Overview)
26. Solaris IP Filter (Tasks)
Part IV Mobile IP
27. Mobile IP (Overview)
28. Administering Mobile IP (Tasks)
29. Mobile IP Files and Commands (Reference)
Part V IPMP
30. Introducing IPMP (Overview)
31. Administering IPMP (Tasks)
Part VI IP Quality of Service (IPQoS)
32. Introducing IPQoS (Overview)
33. Planning for an IPQoS-Enabled Network (Tasks)
34. Creating the IPQoS Configuration File (Tasks)
35. Starting and Maintaining IPQoS (Tasks)
36. Using Flow Accounting and Statistics Gathering (Tasks)
Setting Up Flow Accounting (Task Map)
Recording Information About Traffic Flows
How to Create a File for Flow-Accounting Data
Gathering Statistical Information
37. IPQoS in Detail (Reference)
Glossary
Index
The following task map lists the generic tasks for obtaining information about traffic flows by using the flowacct module.
Task
Description
For Instructions
1. Create a file to contain accounting information for traffic flows.
Use the acctadm command to create a file that holds the results of processing by flowacct.
2. Define flowacct parameters in the IPQoS configuration file.
Define values for the timer, timeout, and max_limit parameters.
How to Enable Accounting for a Class in the IPQoS Configuration File