System Administration Guide: Network Services
Previous Next

Document Information

Preface

Part I Network Services Topics

1.  Network Service (Overview)

2.  Managing Web Cache Servers

3.  Time-Related Services

Part II Accessing Network File Systems Topics

4.  Managing Network File Systems (Overview)

5.  Network File System Administration (Tasks)

6.  Accessing Network File Systems (Reference)

Part III SLP Topics

7.  SLP (Overview)

8.  Planning and Enabling SLP (Tasks)

9.  Administering SLP (Tasks)

10.  Incorporating Legacy Services

11.  SLP (Reference)

Part IV Mail Services Topics

12.  Mail Services (Overview)

13.  Mail Services (Tasks)

14.  Mail Services (Reference)

Part V Serial Networking Topics

15.  Solaris PPP 4.0 (Overview)

16.  Planning for the PPP Link (Tasks)

17.  Setting Up a Dial-up PPP Link (Tasks)

18.  Setting Up a Leased-Line PPP Link (Tasks)

19.  Setting Up PPP Authentication (Tasks)

20.  Setting Up a PPPoE Tunnel (Tasks)

21.  Fixing Common PPP Problems (Tasks)

22.  Solaris PPP 4.0 (Reference)

23.  Migrating From Asynchronous Solaris PPP to Solaris PPP 4.0 (Tasks)

24.  UUCP (Overview)

25.  Administering UUCP (Tasks)

26.  UUCP (Reference)

UUCP /etc/uucp/Systems File

UUCP /etc/uucp/Devices File

UUCP /etc/uucp/Dialers File

Other Basic UUCP Configuration Files

UUCP /etc/uucp/Permissions File

UUCP /etc/uucp/Poll File

UUCP /etc/uucp/Config File

UUCP/etc/uucp/Grades File

Other UUCP Configuration Files

UUCP Administrative Files

UUCP Error Messages

Part VI Working With Remote Systems Topics

27.  Working With Remote Systems (Overview)

28.  Administering the FTP Server (Tasks)

29.  Accessing Remote Systems (Tasks)

Part VII Monitoring Network Services Topics

30.  Monitoring Network Performance (Tasks)

Glossary

Index

UUCP /etc/uucp/Config File

The /etc/uucp/Config file enables you to override certain parameters manually. Each entry in the Config file has this format:

parameter=value

See the Config file that is provided with your system for a complete list of configurable parameter names.

The following Config entry sets the default protocol ordering to Gge and changes the G protocol defaults to 7 windows and 512-byte packets.

Protocol=G(7,512)ge
Previous Next