Document Information
Preface
Part I Network Services Topics
1. Network Service (Overview)
2. Managing Web Cache Servers
3. Time-Related Services
Part II Accessing Network File Systems Topics
4. Managing Network File Systems (Overview)
5. Network File System Administration (Tasks)
6. Accessing Network File Systems (Reference)
Part III SLP Topics
7. SLP (Overview)
8. Planning and Enabling SLP (Tasks)
9. Administering SLP (Tasks)
10. Incorporating Legacy Services
11. SLP (Reference)
Part IV Mail Services Topics
12. Mail Services (Overview)
13. Mail Services (Tasks)
14. Mail Services (Reference)
Part V Serial Networking Topics
15. Solaris PPP 4.0 (Overview)
16. Planning for the PPP Link (Tasks)
17. Setting Up a Dial-up PPP Link (Tasks)
18. Setting Up a Leased-Line PPP Link (Tasks)
19. Setting Up PPP Authentication (Tasks)
20. Setting Up a PPPoE Tunnel (Tasks)
21. Fixing Common PPP Problems (Tasks)
22. Solaris PPP 4.0 (Reference)
23. Migrating From Asynchronous Solaris PPP to Solaris PPP 4.0 (Tasks)
24. UUCP (Overview)
25. Administering UUCP (Tasks)
UUCP Administration (Task Map)
Adding UUCP Logins
How to Add UUCP Logins
Starting UUCP
How to Start UUCP
Running UUCP Over TCP/IP
How to Activate UUCP for TCP/IP
UUCP Security and Maintenance
Troubleshooting UUCP
How to Check for Faulty Modems or ACUs
How to Debug Transmissions
26. UUCP (Reference)
Part VI Working With Remote Systems Topics
27. Working With Remote Systems (Overview)
28. Administering the FTP Server (Tasks)
29. Accessing Remote Systems (Tasks)
Part VII Monitoring Network Services Topics
30. Monitoring Network Performance (Tasks)
Glossary
Index
The following table provides pointers to the procedures that are covered in this chapter, in addition to a short description of each procedure.
Task
Description
For Instructions
Allow remote machines to have access to your system
Edit the /etc/passwd file to add entries to identify the machines that are permitted to access your system.
Start UUCP
Use the supplied shell scripts to start UUCP.
Enable UUCP to work with TCP/IP
Edit /etc/inetd.conf and /etc/uucp/Systems files to activate UUCP for TCP/IP.
Troubleshoot some common UUCP problems
Use diagnostic steps to check for faulty modems or ACUs.
Use diagnostic steps to debug transmissions.