Document Information
Preface
1. Managing Removable Media (Overview)
2. Managing Removable Media (Tasks)
3. Accessing Removable Media (Tasks)
4. Writing CDs and DVDs (Tasks)
5. Managing Devices (Overview/Tasks)
6. Dynamically Configuring Devices (Tasks)
Dynamic Reconfiguration and Hot-Plugging
SCSI Hot-Plugging With the cfgadm Command (Task Map)
SCSI Hot-Plugging With the cfgadm Command
How to Display Information About SCSI Devices
How to Unconfigure a SCSI Controller
How to Configure a SCSI Controller
How to Configure a SCSI Device
How to Disconnect a SCSI Controller
SPARC: How to Connect a SCSI Controller
SPARC: How to Add a SCSI Device to a SCSI Bus
SPARC: How to Replace an Identical Device on a SCSI Controller
SPARC: How to Remove a SCSI Device
How to Resolve a Failed SCSI Unconfigure Operation
PCI or PCIe Hot-Plugging With the cfgadm Command (Task Map)
PCI or PCIe Hot-Plugging With the cfgadm Command
How to Display PCI Slot Configuration Information
How to Remove a PCI Adapter Card
How to Add a PCI Adapter Card
Reconfiguration Coordination Manager (RCM) Script Overview
RCM Script Tasks
How to Install an RCM Script
How to Remove an RCM Script
How to Test an RCM Script
7. Using USB Devices (Overview)
8. Using USB Devices (Tasks)
9. Using InfiniBand Devices (Overview/Tasks)
10. Managing Disks (Overview)
11. Administering Disks (Tasks)
12. SPARC: Adding a Disk (Tasks)
13. x86: Adding a Disk (Tasks)
14. Configuring Solaris iSCSI Targets and Initiators (Tasks)
15. Configuring and Managing the Solaris Internet Storage Name Service (iSNS)
16. The format Utility (Reference)
17. Managing File Systems (Overview)
18. Creating UFS, TMPFS, and LOFS File Systems (Tasks)
19. Mounting and Unmounting File Systems (Tasks)
20. Using The CacheFS File System (Tasks)
21. Configuring Additional Swap Space (Tasks)
22. Checking UFS File System Consistency (Tasks)
23. UFS File System (Reference)
24. Backing Up and Restoring File Systems (Overview)
25. Backing Up Files and File Systems (Tasks)
26. Using UFS Snapshots (Tasks)
27. Restoring Files and File Systems (Tasks)
28. UFS Backup and Restore Commands (Reference)
29. Copying UFS Files and File Systems (Tasks)
30. Managing Tape Drives (Tasks)
Index
Task
Description
For Instructions
Display information about SCSI devices.
Display information about SCSI controllers and devices.
Unconfigure a SCSI controller.
Configure a SCSI controller.
Configure a SCSI controller that was previously unconfigured.
Configure a SCSI device.
Configure a specific SCSI device.
Disconnect a SCSI controller.
Disconnect a specific SCSI controller.
Connect a SCSI controller.
Connect a specific SCSI controller that was previously disconnected.
Add a SCSI device to a SCSI bus.
Add a specific SCSI device to a SCSI bus.
Replace an identical device on a SCSI controller.
Replace a device on the SCSI bus with another device of the same type.
Remove a SCSI device.
Remove a SCSI device from the system.
Troubleshoot SCSI configuration problems.
Resolve a failed SCSI unconfigure operation.