Document Information
Preface
1. Managing Removable Media (Overview)
2. Managing Removable Media (Tasks)
3. Accessing Removable Media (Tasks)
4. Writing CDs and DVDs (Tasks)
5. Managing Devices (Overview/Tasks)
6. Dynamically Configuring Devices (Tasks)
7. Using USB Devices (Overview)
8. Using USB Devices (Tasks)
9. Using InfiniBand Devices (Overview/Tasks)
Overview of InfiniBand Devices
Dynamically Reconfiguring IB Devices (Task Map)
Dynamically Reconfiguring IB Devices (cfgadm)
How to Display IB Device Information
How to Unconfigure an IOC Device
How to Configure an IOC Device
How to Unconfigure an IB Port, HCA_SVC, or a VPPA Device
How to Configure a IB Port, HCA_SVC, or a VPPA Device
How to Unconfigure an IB Pseudo Device
How to Configure an IB Pseudo Device
How to Display Kernel IB Clients of an HCA
How to Unconfigure IB Devices Connected to an HCA
How to Update the IB p_key Tables
How to Display IB Communication Services
How to Add a VPPA Communication Service
How to Remove an Existing IB Port, HCA_SVC, or a VPPA Communication Service
How to Update an IOC Configuration
Using the uDAPL Application Interface With InfiniBand Devices
How to Enable uDAPL
10. Managing Disks (Overview)
11. Administering Disks (Tasks)
12. SPARC: Adding a Disk (Tasks)
13. x86: Adding a Disk (Tasks)
14. Configuring Solaris iSCSI Targets and Initiators (Tasks)
15. Configuring and Managing the Solaris Internet Storage Name Service (iSNS)
16. The format Utility (Reference)
17. Managing File Systems (Overview)
18. Creating UFS, TMPFS, and LOFS File Systems (Tasks)
19. Mounting and Unmounting File Systems (Tasks)
20. Using The CacheFS File System (Tasks)
21. Configuring Additional Swap Space (Tasks)
22. Checking UFS File System Consistency (Tasks)
23. UFS File System (Reference)
24. Backing Up and Restoring File Systems (Overview)
25. Backing Up Files and File Systems (Tasks)
26. Using UFS Snapshots (Tasks)
27. Restoring Files and File Systems (Tasks)
28. UFS Backup and Restore Commands (Reference)
29. Copying UFS Files and File Systems (Tasks)
30. Managing Tape Drives (Tasks)
Index
Task
Description
For Instructions
Display IB device information.
Display information about the IB devices on your system.
Configure or unconfigure an IOC device.
Select one of the following:
Unconfigure an IOC device.
Configure an IOC device.
Configure or unconfigure a port or VPPA device.
Unconfigure a port or a VPPA device.
Configure a port or a VPPA device.
Configure or unconfigure an IB pseudo device.
Unconfigure an IB pseudo device.
Configure an IB pseudo device.
Display kernel IB clients of an HCA.
You might need to display information about kernel IP clients of an HCA, particularly if you're going to unconfigure an HCA.
Configure or unconfigure an IB HCA.
Unconfigure IB devices that are connected to an HCA.
Configure IB devices that are connected to an HCA.
Configuring an IB HCA
Update the IB p_key tables.
If the p_key table information of a HCA port changes, IBTF and IBDM need to be notified so that their internal p_key databases are updated.
Display IB communication services
Display the IB communication services that are currently in use by the IBTF.
Add or remove a VPPA communication service.
Add a VPPA communication service.
Remove a VPPA communication service.
Update an IOC configuration.
You can update the properties of all the IOC device nodes or update a particular IOC Ap_Id.