Solaris Dynamic Tracing Guide
Previous Next

Probes

The mib provider makes available probes for counters from several MIBs. The protocols that export MIBs instrumented by the mib provider are listed in Table 28-1. The table includes a reference to documentation that specifies some or all of the MIB, the name of the kernel statistic that may be used to access the running counts (using the kstat(1M) -n statistic option), and a reference to the table that has a complete definition of the probes. All MIB counters are also available through the -s option to netstat(1M).

Table 28-1 mib probes

Protocol

MIB Description

Kernel Statistic

mib Probes Table

ICMP

RFC 1213

icmp

Table 28-2

IP

RFC 1213

ip

Table 28-3

IPsec

ip

Table 28-4

IPv6

RFC 2465

Table 28-5

SCTP

“SCTP MIB” (Internet draft)

sctp

Table 28-7

TCP

RFC 1213

tcp

Table 28-8

UDP

RFC 1213

udp

Table 28-9

Table 28-2 ICMP mib Probes

icmpInAddrMaskReps

Probe that fires whenever an ICMP Address Mask Reply message is received.

icmpInAddrMasks

Probe that fires whenever an ICMP Address Mask Request message is received.

icmpInBadRedirects

Probe that fires whenever an ICMP Redirect message is received that is determined to be malformed in some way (unknown ICMP code, sender or target off-link, and the like).

icmpInCksumErrs

Probe that fires whenever an ICMP message with a bad checksum is received.

icmpInDestUnreachs

Probe that fires whenever an ICMP Destination Unreachable message is received.

icmpInEchoReps

Probe that fires whenever an ICMP Echo Reply message is received.

icmpInEchos

Probe that fires whenever an ICMP Echo request message is received.

icmpInErrors

Probe that fires whenever an ICMP message is received that is determined to have an ICMP-specific error (bad ICMP checksum, bad length, etc.).

icmpInFragNeeded

Probe that fires whenever an ICMP Destination Unreachable (Fragmentation Needed) message is received, indicating that a sent packet was lost because it was larger than some MTU and the Don't Fragment flag was set.

icmpInMsgs

Probe that fires whenever an ICMP message is received. Whenever this probe fires, the icmpInErrors probe may also fire if the message is determined to have an ICMP-specific error.

icmpInOverflows

Probe that fires whenever an ICMP message is received, but the message is subsequently dropped due to lack of buffer space.

icmpInParmProbs

Probe that fires whenever an ICMP Parameter Problem message is received.

icmpInRedirects

Probe that fires whenever an ICMP Redirect message is received.

icmpInSrcQuenchs

Probe that fires whenever an ICMP Source Quench message is received.

icmpInTimeExcds

Probe that fires whenever an ICMP Time Exceeded message is received.

icmpInTimestampReps

Probe that fires whenever an ICMP Timestamp Reply message is received.

icmpInTimestamps

Probe that fires whenever an ICMP Timestamp request message is received.

icmpInUnknowns

Probe that fires whenever an ICMP message of unknown type is received.

icmpOutAddrMaskReps

Probe that fires whenever an ICMP Address Mask Reply message is sent.

icmpOutDestUnreachs

Probe that fires whenever an ICMP Destination Unreachable message is sent.

icmpOutDrops

Probe that fires whenever an outbound ICMP message is dropped for some reason (such as memory allocation failure, broadcast/multicast source or destination, and the like).

icmpOutEchoReps

Probe that fires whenever an ICMP Echo Reply message is sent.

icmpOutErrors

Probe that fires whenever an ICMP message is not sent due to problems discovered within ICMP, such as a lack of buffers. This probe will not fire if errors are discovered outside the ICMP layer, such as the inability of IP to route the resulting datagram.

icmpOutFragNeeded

Probe that fires whenever an ICMP Destination Unreachable (Fragmentation Needed) message is sent.

icmpOutMsgs

Probe that fires whenever an ICMP message is sent. Whenever this probe fires, the icmpOutErrors probe might also fire if the message is determined to have ICMP-specific errors.

icmpOutParmProbs

Probe that fires whenever an ICMP Parameter Problem message is sent.

icmpOutRedirects

Probe that fires whenever an ICMP Redirect message is sent. For a host, this probe will never fire, because hosts do not send redirects.

icmpOutTimeExcds

Probe that fires whenever an ICMP Time Exceeded message is sent.

icmpOutTimestampReps

Probe that fires whenever an ICMP Timestamp Reply message is sent.

Table 28-3 IP mib Probes

ipForwDatagrams

Probe that fires whenever a datagram is received that does not have this machine as its final IP destination, and an attempt is made to find a route to forward the datagram to that final destination. On machines that do not act as IP gateways, this probe will only fire for those packets that are source-routed through this machine, and for which the source-route option processing was successful.

ipForwProhibits

Probe that fires whenever a datagram is received that does not have this machine as its final IP destination, but because the machine is not permitted to act as a router, no attempt is made to find a route to forward the datagram to that final destination.

ipFragCreates

Probe that fires whenever an IP datagram fragment is generated as a result of fragmentation.

ipFragFails

Probe that fires whenever an IP datagram is discarded because it could not be fragmented, for example, because fragmentation was required and the Don't Fragment flag was set.

ipFragOKs

Probe that fires whenever an IP datagram has been successfully fragmented.

ipInCksumErrs

Probe that fires whenever an input datagram is discarded due to a bad IP header checksum.

ipInDelivers

Probe that fires whenever an input datagram is successfully delivered to IP user protocols, including ICMP.

ipInDiscards

Probe that fires whenever an input IP datagram is discarded for reasons unrelated to the packet (for example, for lack of buffer space). This probe does not fire for any datagram discarded while awaiting reassembly.

ipInHdrErrors

Probe that fires whenever an input datagram is discarded due to an error in its IP header, including a version number mismatch, a format error, an exceeded time-to-live, an error discovered in processing IP options, and the like.

ipInIPv6

Probe that fires whenever an IPv6 packet erroneously arrives on an IPv4 queue.

ipInReceives

Probe that fires whenever a datagram is received from an interface, even if that datagram is received in error.

ipInUnknownProtos

Probe that fires whenever a locally addressed datagram is received successfully but subsequently discarded because of an unknown or unsupported protocol.

ipOutDiscards

Probe that fires whenever an output IP datagram is discarded for reasons unrelated to the packet (for example, for lack of buffer space). This probe will fire for a packet counted in the ipForwDatagrams MIB counter if the packet meets such a (discretionary) discard criterion.

ipOutIPv6

Probe that fires whenever an IPv6 packet is sent over an IPv4 connection.

ipOutNoRoutes

Probe that fires whenever an IP datagram is discarded because no route could be found to transmit it to its destination. This probe will fire for a packet counted in the ipForwDatagrams MIB counter if the packet meets this “no-route” criterion. This probe will also fire for any datagrams which cannot be routed because all default gateways are down.

ipOutRequests

Probe that fires whenever an IP datagram is supplied to IP for transmission from local IP user protocols (include ICMP). Note that this probe will not fire for any packet counted in the ipForwDatagrams MIB counter.

ipOutSwitchIPv6

Probe that fires whenever a connection changes from using IPv4 to using IPv6 as its IP protocol.

ipReasmDuplicates

Probe that fires whenever the IP reassembly algorithm determines that an IP fragment contains only previously received data.

ipReasmFails

Probe that fires whenever any failure is detected by the IP reassembly algorithm. This probe does not necessarily fire for every discarded IP fragment because some algorithms, notably the algorithm in RFC 815, can lose track of fragments by combining them as they are received.

ipReasmOKs

Probe that fires whenever an IP datagram is successfully reassembled.

ipReasmPartDups

Probe that fires whenever the IP reassembly algorithm determines that an IP fragment contains both some previously received data and some new data.

ipReasmReqds

Probe that fires whenever an IP fragment is received that needs to be reassembled.

Table 28-4 IPsec mib Probes

ipsecInFailed

Probe that fires whenever a received packet is dropped because it fails to match the specified IPsec policy.

ipsecInSucceeded

Probe that fires whenever a received packet matches the specified IPsec policy and processing is allowed to continue.

Table 28-5 IPv6 mib Probes

ipv6ForwProhibits

Probe that fires whenever an IPv6 datagram is received that does not have this machine as its final IPv6 destination, but because the machine is not permitted to act as a router, no attempt is made to find a route to forward the datagram to that final destination.

ipv6IfIcmpBadHoplimit

Probe that fires whenever an ICMPv6 neighbor discovery protocol message is received that is found to have a Hop Limit less than the defined maximum. Such messages might not have originated from a neighbor, and are therefore discarded.

ipv6IfIcmpInAdminProhibs

Probe that fires whenever an ICMPv6 Destination Unreachable (Communication Administratively Prohibited) message is received.

ipv6IfIcmpInBadNeighborAdvertisements

Probe that fires whenever an ICMPv6 Neighbor Advertisement message is received that is malformed in some way.

ipv6IfIcmpInBadNeighborSolicitations

Probe that fires whenever an ICMPv6 Neighbor Solicit message is received that is malformed in some way.

ipv6IfIcmpInBadRedirects

Probe that fires whenever an ICMPv6 Redirect message is received that is malformed in some way.

ipv6IfIcmpInDestUnreachs

Probe that fires whenever an ICMPv6 Destination Unreachable message is received.

ipv6IfIcmpInEchoReplies

Probe that fires whenever an ICMPv6 Echo Reply message is received.

ipv6IfIcmpInEchos

Probe that fires whenever an ICMPv6 Echo request message is received.

ipv6IfIcmpInErrors

Probe that fires whenever an ICMPv6 message is received that is determined to have an ICMPv6-specific error (such as bad ICMPv6 checksum, bad length, and the like).

ipv6IfIcmpInGroupMembBadQueries

Probe that fires whenever an ICMPv6 Group Membership Query message is received that is malformed in some way.

ipv6IfIcmpInGroupMembBadReports

Probe that fires whenever an ICMPv6 Group Membership Report message is received that is malformed in some way.

ipv6IfIcmpInGroupMembOurReports

Probe that fires whenever an ICMPv6 Group Membership Report message is received.

ipv6IfIcmpInGroupMembQueries

Probe that fires whenever an ICMPv6 Group Membership Query message is received.

ipv6IfIcmpInGroupMembReductions

Probe that fires whenever an ICMPv6 Group Membership Reduction message is received.

ipv6IfIcmpInGroupMembResponses

Probe that fires whenever an ICMPv6 Group Membership Response message is received.

ipv6IfIcmpInGroupMembTotal

Probe that fires whenever an ICMPv6 multicast listener discovery message is received.

ipv6IfIcmpInMsgs

Probe that fires whenever an ICMPv6 message is received. When this probe fires, the ipv6IfIcmpInErrors probe might also fire if the message has an ICMPv6-specific error.

ipv6IfIcmpInNeighborAdvertisements

Probe that fires whenever an ICMPv6 Neighbor Advertisement message is received.

ipv6IfIcmpInNeighborSolicits

Probe that fires whenever an ICMPv6 Neighbor Solicit message is received.

ipv6IfIcmpInOverflows

Probe that fires whenever an ICMPv6 message is received, but that message is subsequently dropped due to lack of buffer space.

ipv6IfIcmpInParmProblems

Probe that fires whenever an ICMPv6 Parameter Problem message is received.

ipv6IfIcmpInRedirects

Probe that fires whenever an ICMPv6 Redirect message is received.

ipv6IfIcmpInRouterAdvertisements

Probe that fires whenever an ICMPv6 Router Advertisement message is received.

ipv6IfIcmpInRouterSolicits

Probe that fires whenever an ICMPv6 Router Solicit message is received.

ipv6IfIcmpInTimeExcds

Probe that fires whenever an ICMPv6 Time Exceeded message is received.

ipv6IfIcmpOutAdminProhibs

Probe that fires whenever an ICMPv6 Destination Unreachable (Communication Administratively Prohibited) message is sent.

ipv6IfIcmpOutDestUnreachs

Probe that fires whenever an ICMPv6 Destination Unreachable message is sent.

ipv6IfIcmpOutEchoReplies

Probe that fires whenever an ICMPv6 Echo Reply message is sent.

ipv6IfIcmpOutEchos

Probe that fires whenever an ICMPv6 Echo message is sent.

ipv6IfIcmpOutErrors

Probe that fires whenever an ICMPv6 message is not sent due to problems discovered within ICMPv6, such as a lack of buffers. This probe will not fire if errors are discovered outside the ICMPv6 layer, such as the inability of IPv6 to route the resulting datagram.

ipv6IfIcmpOutGroupMembQueries

Probe that fires whenever an ICMPv6 Group Membership Query message is sent.

ipv6IfIcmpOutGroupMembReductions

Probe that fires whenever an ICMPv6 Group Membership Reduction message is sent.

ipv6IfIcmpOutGroupMembResponses

Probe that fires whenever an ICMPv6 Group Membership Response message is sent.

ipv6IfIcmpOutMsgs

Probe that fires whenever an ICMPv6 message is sent. When this probe fires, the ipv6IfIcmpOutErrors probe might also fire if the message has ICMPv6-specific errors.

ipv6IfIcmpOutNeighborAdvertisements

Probe that fires whenever an ICMPv6 Neighbor Advertisement message is sent.

ipv6IfIcmpOutNeighborSolicits

Probe that fires whenever an ICMPv6 Neighbor Solicitation message is sent.

ipv6IfIcmpOutParmProblems

Probe that fires whenever an ICMPv6 Parameter Problem message is sent.

ipv6IfIcmpOutPktTooBigs

Probe that fires whenever an ICMPv6 Packet Too Big message is sent.

ipv6IfIcmpOutRedirects

Probe that fires whenever an ICMPv6 Redirect message is sent. For a host, this probe will never fire, because hosts do not send redirects.

ipv6IfIcmpOutRouterAdvertisements

Probe that fires whenever an ICMPv6 Router Advertisement message is sent.

ipv6IfIcmpOutRouterSolicits

Probe that fires whenever an ICMPv6 Router Solicit message is sent.

ipv6IfIcmpOutTimeExcds

Probe that fires whenever an ICMPv6 Time Exceeded message is sent.

ipv6InAddrErrors

Probe that fires whenever an input datagram is discarded because the IPv6 address in their IPv6 header's destination field is not a valid address to be received by this entity. This probe will fire for invalid addresses (for example, ::0) and for unsupported addresses (for example, addresses with unallocated prefixes). For machines that are not configured to act as IPv6 routers and therefore do not forward datagrams, this probe will fire for datagrams discarded because the destination address was not a local address.

ipv6InDelivers

Probe that fires whenever an input datagram is successfully delivered to IPv6 user-protocols (including ICMPv6).

ipv6InDiscards

Probe that fires whenever an input IPv6 datagram is discarded for reasons unrelated to the packet (for example, for lack of buffer space). This probe does not fire for any datagram discarded while awaiting reassembly.

ipv6InHdrErrors

Probe that fires whenever an input datagram is discarded due to an error in its IPv6 header, including a version number mismatch, a format error, an exceeded hop count, an error discovered in processing IPv6 options, and the like.

ipv6InIPv4

Probe that fires whenever an IPv4 packet erroneously arrives on an IPv6 queue.

ipv6InMcastPkts

Probe that fires whenever a multicast IPv6 packet is received.

ipv6InNoRoutes

Probe that fires whenever a routed IPv6 datagram is discarded because no route could be found to transmit it to its destination. This probe will only fire for packets that have originated externally.

ipv6InReceives

Probe that fires whenever an IPv6 datagram is received from an interface, even if that datagram is received in error.

ipv6InTooBigErrors

Probe that fires whenever a fragment is received that is larger than the maximum fragment size.

ipv6InTruncatedPkts

Probe that fires whenever an input datagram is discarded because the datagram frame didn't carry enough data.

ipv6InUnknownProtos

Probe that fires whenever a locally-addressed IPv6 datagram is received successfully but subsequently discarded because of an unknown or unsupported protocol.

ipv6OutDiscards

Probe that fires whenever an output IPv6 datagram is discarded for reasons unrelated to the packet (for example, for lack of buffer space). This probe will fire for a packet counted in the ipv6OutForwDatagrams MIB counter if the packet meets such a (discretionary) discard criterion.

ipv6OutForwDatagrams

Probe that fires whenever a datagram is received that does not have this machine as its final IPv6 destination, and an attempt is made to find a route to forward the datagram to that final destination. On a machine that does not act as an IPv6 router, this probe will only fire for those packets that are source-routed through the machine, and for which the source-route option processing was successful.

ipv6OutFragCreates

Probe that fires whenever an IPv6 datagram fragment is generated as a result of fragmentation.

ipv6OutFragFails

Probe that fires whenever an IPv6 datagram is discarded because it could not be fragmented, for example, because its Don't Fragment flag was set.

ipv6OutFragOKs

Probe that fires whenever an IPv6 datagrams has been successfully fragmented.

ipv6OutIPv4

Probe that fires whenever an IPv6 packet is sent over an IPv4 connection.

ipv6OutMcastPkts

Probe that fires whenever a multicast packet is sent.

ipv6OutNoRoutes

Probe that fires whenever an IPv6 datagram is discarded because no route could be found to transmit it to its destination. This probe will not fire for packets that have originated externally.

ipv6OutRequests

Probe that fires whenever an IPv6 datagram is supplied to IPv6 for transmission from local IPv6 user protocols (including ICMPv6). This probe will not fire for any packet counted in the ipv6ForwDatagrams MIB counter.

ipv6OutSwitchIPv4

Probe that fires whenever a connection changes from using IPv6 to using IPv4 as its IP protocol.

ipv6ReasmDuplicates

Probe that fires whenever the IPv6 reassembly algorithm determines that an IPv6 fragment contains only previously received data.

ipv6ReasmFails

Probe that fires whenever a failure is detected by the IPv6 reassembly algorithm. This probe does not necessarily fire for every discarded IPv6 fragment since some algorithms can lose track of fragments by combining them as they are received.

ipv6ReasmOKs

Probe that fires whenever an IPv6 datagram is successfully reassembled.

ipv6ReasmPartDups

Probe that fires whenever the IPv6 reassembly algorithm determines that an IPv6 fragment contains both some previously received data and some new data.

ipv6ReasmReqds

Probe that fires whenever an IPv6 fragment is received that needs to be reassembled.

Table 28-6 Raw IP mib Probes

rawipInCksumErrs

Probe that fires whenever a raw IP packet is received that has a bad IP checksum.

rawipInDatagrams

Probe that fires whenever a raw IP packet is received.

rawipInErrors

Probe that fires whenever a raw IP packet is received that is malformed in some way.

rawipInOverflows

Probe that fires whenever a raw IP packet is received, but that packet is subsequently dropped due to lack of buffer space.

rawipOutDatagrams

Probe that fires whenever a raw IP packet is sent.

rawipOutErrors

Probe that fires whenever a raw IP packet is not sent due to some error condition, typically because the raw IP packet was malformed in some way.

Table 28-7 SCTP mib Probes

sctpAborted

Probe that fires whenever an SCTP association has made a direct transition to the CLOSED state from any state using the ABORT primitive, denoting ungraceful termination of the association.

sctpActiveEstab

Probe that fires whenever an SCTP association has made a direct transition to the ESTABLISHED state from the COOKIE-ECHOED state, denoting that the upper layer has initiated the association attempt.

sctpChecksumError

Probe that fires whenever an SCTP packet is received from peers with an invalid checksum.

sctpCurrEstab

Probe that fires whenever an SCTP association is tallied as a part of reading the sctpCurrEstab MIB counter. An SCTP association is tallied if its current state is ESTABLISHED, SHUTDOWN-RECEIVED, or SHUTDOWN-PENDING.

sctpFragUsrMsgs

Probe that fires whenever a user message has to be fragmented because of the MTU.

sctpInClosed

Probe that fires whenever data is received on a closed SCTP association.

sctpInCtrlChunks

Probe that fires whenever the sctpInCtrlChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpInDupAck

Probe that fires whenever a duplicate ACK is received.

sctpInInvalidCookie

Probe that fires whenever an invalid cookie is received.

sctpInOrderChunks

Probe that fires whenever the sctpInOrderChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpInSCTPPkts

Probe that fires whenever the sctpInSCTPPkts MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpInUnorderChunks

Probe that fires whenever the sctpInUnorderChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpListenDrop

Probe that fires whenever an incoming connection is dropped for any reason.

sctpOutAck

Probe that fires whenever a selective acknowledgement is sent.

sctpOutAckDelayed

Probe that fires whenever delayed acknowledgement processing is performed for an SCTP association. Any acknowledgements sent as a part of delayed acknowledgement processing will cause the sctpOutAck probe to fire.

sctpOutCtrlChunks

Probe that fires whenever the sctpOutCtrlChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpOutOfBlue

Probe that fires whenever an otherwise correct SCTP packet is received for which the receiver is not able to identify the association to which the packet belongs.

sctpOutOrderChunks

Probe that fires whenever the sctpOutOrderChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpOutSCTPPkts

Probe that fires whenever the sctpOutSCTPPkts MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpOutUnorderChunks

Probe that fires whenever the sctpOutUnorderChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpOutWinProbe

Probe that fires whenever a window probe is sent.

sctpOutWinUpdate

Probe that fires whenever a window update is sent.

sctpPassiveEstab

Probe that fires whenever SCTP associations have made a direct transition to the ESTABLISHED state from the CLOSED state. The remote endpoint has initiated the association attempt.

sctpReasmUsrMsgs

Probe that fires whenever the sctpReasmUsrMsgs MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpRetransChunks

Probe that fires whenever the sctpRetransChunks MIB counter is updated, either because the MIB counter is explicitly queried or because an SCTP connection is closed. The value by which the MIB counter is to be increased is in args[0].

sctpShutdowns

Probe that fires whenever an SCTP association makes the direct transition to the CLOSED state from either the SHUTDOWN-SENT state or the SHUTDOWN-ACK-SENT state, denoting graceful termination of the association.

sctpTimHeartBeatDrop

Probe that fires whenever an SCTP association is aborted due to failure to receive a heartbeat acknowledgement.

sctpTimHeartBeatProbe

Probe that fires whenever an SCTP heartbeat is sent.

sctpTimRetrans

Probe that fires whenever timer-based retransmit processing is performed on an association.

sctpTimRetransDrop

Probe that fires whenever prolonged failure to perform timer-based retransmission results in the association being aborted.

Table 28-8 TCP mib Probes

tcpActiveOpens

Probe that fires whenever a TCP connection makes a direct transition from the CLOSED state to the SYN_SENT state.

tcpAttemptFails

Probe that fires whenever a TCP connection makes a direct transition to the CLOSED state from either the SYN_SENT state or the SYN_RCVD state and whenever a TCP connection makes a direct transition to the LISTEN state from the SYN_RCVD state.

tcpCurrEstab

Probe that fires whenever a TCP connection is tallied as a part of reading the tcpCurrEstab MIB counter. A TCP connection is tallied if its current state is either ESTABLISHED or CLOSE_WAIT.

tcpEstabResets

Probe that fires whenever a TCP connection makes the direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE_WAIT state.

tcpHalfOpenDrop

Probe that fires whenever a connection is dropped due to a full queue of connections in the SYN_RCVD state.

tcpInAckBytes

Probe that fires whenever an ACK is received for previously sent data. The number of bytes acknowledged is passed in args[0].

tcpInAckSegs

Probe that fires whenever an ACK is received for a previously sent segment.

tcpInAckUnsent

Probe that fires whenever an ACK is received for an unsent segment.

tcpInClosed

Probe that fires whenever data was received for a connection in a closing state.

tcpInDataDupBytes

Probe that fires whenever a segment is received such that all data in the segment has been previously received. The number of bytes in the duplicated segment is passed in args[0].

tcpInDataDupSegs

Probe that fires whenever a segment is received such that all data in the segment has been previously received. The number of bytes in the duplicated segment is passed in args[0].

tcpInDataInorderBytes

Probe that fires whenever data is received such that all data prior to the new data's sequence number has been previously received. The number of bytes received in-order is passed in args[0].

tcpInDataInorderSegs

Probe that fires whenever a segment is received such that all data prior to the new segment's sequence number has been previously received.

tcpInDataPartDupBytes

Probe that fires whenever a segment is received such that some of the data in the segment has been previously received, but some of the data in the segment is new. The number of duplicate bytes is passed in args[0].

tcpInDataPartDupSegs

Probe that fires whenever a segment is received such that some of the data in the segment has been previously received, but some of the data in the segment is new. The number of duplicate bytes is passed in args[0].

tcpInDataPastWinBytes

Probe that fires whenever data is received that lies past the current receive window. The number of bytes is in args[0].

tcpInDataPastWinSegs

Probe that fires whenever a segment is received that lies past the current receive window.

tcpInDataUnorderBytes

Probe that fires whenever data is received such that some data prior to the new data's sequence number is missing. The number of bytes received unordered is passed in args[0].

tcpInDataUnorderSegs

Probe that fires whenever a segment is received such that some data prior to the new data's sequence number is missing.

tcpInDupAck

Probe that fires whenever a duplicate ACK is received.

tcpInErrs

Probe that fires whenever a TCP error (for example, a bad TCP checksum) is found on a received segment.

tcpInSegs

Probe that fires whenever a segment is received, even if that segment is later found to have an error that prevents further processing.

tcpInWinProbe

Probe that fires whenever a window probe is received.

tcpInWinUpdate

Probe that fires whenever a window update is received.

tcpListenDrop

Probe that fires whenever an incoming connection is dropped due to a full listen queue.

tcpListenDropQ0

Probe that fires whenever a connection is dropped due to a full queue of connections in the SYN_RCVD state.

tcpOutAck

Probe that fires whenever an ACK is sent.

tcpOutAckDelayed

Probe that fires whenever an ACK is sent after having been initially delayed.

tcpOutControl

Probe that fires whenever a SYN, FIN, or RST is sent.

tcpOutDataBytes

Probe that fires whenever data is sent. The number of bytes sent is in args[0].

tcpOutDataSegs

Probe that fires whenever a segment is sent.

tcpOutFastRetrans

Probes that fires whenever a segment is retransmitted as part of the fast retransmit algorithm.

tcpOutRsts

Probe that fires whenever a segment is sent with the RST flag set.

tcpOutSackRetransSegs

Probe that fires whenever a segment is retransmitted on a connection that has selective acknowledgement enabled.

tcpOutSegs

Probe that fires whenever a segment is sent that contains at least one non-retransmitted byte.

tcpOutUrg

Probe that fires whenever a segment is sent with the URG flag set, and with a valid urgent pointer.

tcpOutWinProbe

Probe that fires whenever a window probe is sent.

tcpOutWinUpdate

Probe that fires whenever a window update is sent.

tcpPassiveOpens

Probe that fires whenever a TCP connections have made a direct transition to the SYN_RCVD state from the LISTEN state.

tcpRetransBytes

Probe that fires whenever data is retransmitted. The number of bytes retransmitted is in args[0].

tcpRetransSegs

Probe that fires whenever a segment is sent that contains one or more retransmitted bytes.

tcpRttNoUpdate

Probe that fires whenever data was received, but there was no timestamp information available with which to update the RTT.

tcpRttUpdate

Probe that fires whenever data was received containing the timestamp information necessary to update the RTT.

tcpTimKeepalive

Probe that fires whenever timer-based keep-alive processing is performed on a connection.

tcpTimKeepaliveDrop

Probe that fires whenever keep-alive processing results in termination of a connection.

tcpTimKeepaliveProbe

Probe that fires whenever a keep-alive probe is sent out as a part of keep-alive processing.

tcpTimRetrans

Probe that fires whenever timer-based retransmit processing is performed on a connection.

tcpTimRetransDrop

Probe that fires whenever prolonged failure to perform timer-based retransmission results in termination of the connection.

Table 28-9 UDP mib Probes

udpInCksumErrs

Probe that fires whenever a datagram is discarded due to a bad UDP checksum.

udpInDatagrams

Probe that fires whenever a UDP datagram is received.

udpInErrors

Probe that fires whenever a UDP datagram is received, but is discarded due to either a malformed packet header or the failure to allocate an internal buffer.

udpInOverflows

Probe that fires whenever a UDP datagram is received, but subsequently dropped due to lack of buffer space.

udpNoPorts

Probe that fires whenever a UDP datagram is received on a port to which no socket is bound.

udpOutDatagrams

Probe that fires whenever a UDP datagram is sent.

udpOutErrors

Probe that fires whenever a UDP datagram is not sent due to some error condition, typically because the datagram was malformed in some way.

Previous Next